Description

Adjustable Distance Sensor E18-D80NK 10-80 cm – NPN NO

Distance sensor with 50cm cable and nuts for easy installation. When an object is detected, a low state appears on the output – 0V. When nothing is closer than the set value then the sensor sends a high state – 5V.

• The sensor is equipped with reverse power connection protection.
• The sensor can be connected to the leads of microcontrollers such as AVR, STM32 or kits Arduino and Raspberry Pi.
• Popular proximity sensor can be used in many projects and devices even industrial ones.

Technical data

• Supply voltage: 5 V
• Current consumption: less than 100 mA
• Measuring range adjustable: from 10 to 80 cm
• Range adjustment knob – multi-turn potentiometer
• Output signal: digital (low state in case – object detected, when object not detected – high state)
• LED to indicate object detection
• Transistor: NPN
• Channel: NO
• Response time: less than 2 ms
• Protection against reverse polarity
• Operating temperature: -25 °C to +55 °C
• Diameter: 18 mm
• Sensor length: 62 mm

Connecting

• Red or brown wire – supply voltage – 5 V
• Green or blue wire – ground – GND
• Yellow or black wire – digital output – OUT
• no object – high state
• object detection – low state

Video materials

Included

• Adjustable Distance Sensor E18-D80NK 10-80 cm – 1pc.