Description

AC POWER controller module up to 2000W – 2kW maximum

SCR voltage and power regulator controls the operating voltage from 10V to 230V AC. The power controller has a built-in potentiometer for infinite output voltage adjustment and a heat sink for better heat dissipation from the triac.

The regulator can be used in many devices powered by AC voltage from the power grid.

• light intensity control (dimmer)
• infinitely variable speed control of motors in power tools, fans, etc.
• charge current regulation in battery chargers
• temperature control: heaters , heaters, etc.

Product features

• Infinitely adjustable motor speed, heater temperature and speed in power tools.
• Terminal block connectors for screwing wires – aRK twist-on connectors
• The system built on thyristor.
• The controller uses an innovative bi-directional high-power SCR to regulate current up to 25A.

Technical data

• max. output power : 2000 watts
• max. output current: 8A
• working voltage : 230 V
• regulation range : 10 V – 230 V
• working temperature: -20°C to 40°C
• triac equipped with a heat sink

Connection method:

• to the input connect the wires with mains voltage 230 V.
• to the input terminal labeled „L” connect the wire with the phase,
• to the terminal „N” connect the neutral wire.
• connect the output terminals freely, provided that the receiver does not require a corresponding connection.

Important note on safety

• There is a high life-threatening voltage on the executive module side of the controller board!
• Do not, under any circumstances, perform tests on the device without proper protection, you risk electric shock.
• There is high potential on almost every element on the module side. Special care should be taken

Included

• AC POWER regulator module up to 2000W – maximum 2kW – 1 pc